Save cutting data

With your tool assembly, you can store cutting data sets for specific tasks, materials and machines. You can do this manually when you specify all data on your own or get recommendations from Sandvik Coromant.
                        

You can access and add cutting data to an assembly directly from the list of assemblies or when you have an assembly open.
                                 

If you have the assembly open. Go to the Cutting data tab.

Here you can:

1. Add new cutting data sets.
2. View existing cutting data.
3. Modify existing cutting data.
4. Copy existing cutting data.
5. Delete existing cutting data.
             

On the list of assemblies, click the Cutting data icon.
                

CoroPlus® Tool Library will open a new window. Here you can:

1. Add new cutting data sets.
2. View existing cutting data.
3. Modify existing cutting data.
4. Copy existing cutting data.
5. Delete existing cutting data.
   

Get cutting data recommendation

With the Get recommendation option, a wizard will be opened where you can select the operation you would like to perform, the workpiece material and your preferred machine. The wizard will then provide cutting data recommendations tailored for that specific situation. This option is only available for Sandvik Coromant cutting tools.
                        

• Start by clicking Get recommendation.
• Select and specify the task/operation you want to get cutting data for.
• Select your preferred machine.
• Select the workpiece material.
• Click Get result to view the recommended cutting data.
• Click Apply to save the data to your assembly.

Specify own cutting data

If you select Specify own cutting data, you can specify your own cutting data based on your own experience and knowledge.
                

• Start by clicking Specify own cutting data.
• Select desired strategy.
• Specify your cutting data.
• Select the workpiece material.
• Select your machine or multiple machines.
• The data set will get an automatic name that you can change in the General information tab.
• Click Apply to save the cutting data.

Get tool recommendation

When you use the Get tool recommendation as starting point for building a new tool assembly, CoroPlus® Tool Library automatically saves the cutting data with the tool assembly.

• Select Get tool recommendation.
• Select and specify the task/operation you want to get cutting data for.
• Select the workpiece material.
• Select your Machine.
• Click Get result.
• Select your preferred cutting tool and click Build tool assembly.
• If needed, add more items to your assembly.
• Give the assembly a name and save it.